Film basics · 7 min read
3M Prestige 70 vs LLumar AIR-80: a light-film comparison on clear glass
Published · Last revised · Written by the Window Tint DE editorial team · Published by Shore Tint & More, a 3M Authorized Window Film Dealer. Editorial disclosure
Who publishes this comparison
Window Tint DE is published by Shore Tint & More, a 3M Authorized Window Film Dealer. We sell and install 3M films, so we have a commercial interest in this comparison. We've tried to make it fair: both columns use each manufacturer's own published figures, and we don't name a winner.

Actual Shore Tint & More installation — Sea Colony · Bethany Beach, DE; 3M Prestige 70 · beachfront condo.
View source case study ↗ — Sea Colony · Bethany Beach, DEExactly which two products
- 3M Prestige 70: the architectural interior-applied film, as published on the 3M Prestige 70 technical data sheet. Not Prestige Exterior and not the Ultra Prestige line.
- LLumar AIR-80BL SR HPR (Clear): the architectural row on LLumar's online performance grid. Not an older AIR 80 PDF and not any automotive product sheet.
- Reference glass for both: 1/4-inch (6 mm) single clear glass. No tinted, dual-pane or Low-E rows are used here.
Published figures on the same reference glass
On LLumar's grid, the page opens on 1/8-inch glass by default. To see the row used here, choose '1/4" (6mm) Single Clear' in the glazing filter and apply it. The default 1/8-inch values are different and shouldn't be compared with this 3M sheet.
| Measure | Bare glass (baseline) | 3M Prestige 70 (interior) | LLumar AIR-80BL SR HPR (Clear) |
|---|---|---|---|
| Visible light transmitted | 88% | 69% | 76% |
| Total solar energy rejected (TSER) | 18% | 49% | 44% |
| Solar heat gain coefficient (SHGC, lower = less solar heat in) | 0.82 | 0.51 | 0.56 |
| Visible light reflected, interior | Not compared here | 8% | 8% |
| Visible light reflected, exterior | Not compared here | 8% | 8% |
| Source and version | Same baseline values appear in both sources | 3M technical data sheet, Revision A, April 2019 (page 1) | LLumar online performance grid, no revision date shown; retrieved Nov 18, 2026 |
How to read this pair
On this reference glass, the published figures point in two directions. AIR-80BL SR HPR keeps more visible light (76% vs 69%). Prestige 70 lets in less solar heat (SHGC 0.51 vs 0.56) and rejects more total solar energy (49% vs 44%). Their visible reflectance is the same in these rows, 8% inside and outside.
So the choice depends on what you value: a little more daylight, or a little more solar heat control. Neither figure tells you how much cooler a particular room will feel or what your bills will be. Those depend on your glass, orientation, shading and use.
What this comparison can't tell you
- It isn't an independent head-to-head lab test. These are manufacturer-published reference-glass figures.
- The 3M sheet doesn't state its full measurement method, so we can't establish that the two sources used equivalent methods.
- The dates differ. The 3M sheet is a 2019 revision; retrieving it in 2026 doesn't make it newly tested or confirm it describes current production. The LLumar grid shows no revision date. Ask for the current sheet for each product when you get a quote.
- It doesn't carry over to tinted, dual-pane, Low-E or other glass. Those need their own published rows and a compatibility check.
- An infrared-rejection percentage is not total solar energy rejected. If a claim mentions IR only, ask for TSER and SHGC on matching glass.
Compatibility and warranty: confirm for each proposed film
No film is automatically safe on every window, and we don't promise that a film won't affect a glass or window warranty. Ask for these for each product you're considering.
| Confirm in writing | Why it matters | 3M Prestige 70 proposal | LLumar AIR-80 proposal |
|---|---|---|---|
| Glass survey and manufacturer approval for your glass | Film suitability depends on glass type, size, shading and existing coatings | ________ | ________ |
| Current U.S. warranty certificate for the exact product | Terms are set by each manufacturer and can change | ________ | ________ |
| Film coverage, glass breakage and seal failure listed separately | These are different things; one may be covered when another isn't | ________ | ________ |
| Eligibility, exclusions and installer registration | Coverage can depend on who installs and whether it's registered | ________ | ________ |
| Removal and reinstallation labor | Some coverage pays for film, not the labor to replace it | ________ | ________ |
| Exact product name and shade on the quote | Product names are similar across lines and versions | ________ | ________ |
A Shore example: Sea Colony, Bethany Beach
The photo on this page shows a real Shore Tint & More installation of 3M Prestige 70 on beachfront condo glass at Sea Colony. It is an illustration of one Shore job only. This Shore project photo does not compare the two films.
Different questions, different guides
If you're comparing within 3M lines or between film categories rather than these two products, these guides answer those questions.
FAQ
Which film is better?
Neither, universally. On this reference glass one keeps more light and the other rejects more solar heat. Your priorities and glass decide.
Can I use these numbers for my dual-pane or Low-E windows?
No. Ask for published figures on matching glass and a compatibility check.
Will either film lower my room temperature by a set amount?
We can't give a number. Results depend on glass, orientation, shading and use.
Why did you pick the 1/4-inch row on LLumar's grid?
To match the 1/4-inch single clear glass on the 3M sheet. The grid's default 1/8-inch row is a different glass.
Sources & further reading
- 3M Prestige 70 technical data sheet, Revision A, April 2019 (PDF) ↗
Page 1 figures for 1/4-inch single clear glass. The sheet doesn't state its full measurement method.
- LLumar architectural performance grid ↗
Select '1/4" (6mm) Single Clear' in the glazing filter; the page defaults to 1/8-inch glass. No revision date shown; row retrieved Nov 18, 2026.
- 3M Prestige Series window film — official product page ↗
- Delaware Window Film — Sea Colony, Bethany Beach with 3M Prestige 70 ↗
Product descriptions and any published performance figures are summarized from the cited manufacturer materials. Request the current data sheet for the exact product and glass you are quoted.